You can attach your CO-DRIVER NO2 to any place in the car. The magnets securely hold the device in place.
Only remove the red protective film once you have found a spot for your CO-DRIVER NO2. Once attached, the metal parts cannot be moved anymore. If you wish to remove the magnets, we recommend using a thin, stiff, blunt tool to carefully wedge between the mounting surface and the magnetic base until the magnet lifts enough for you to grasp it with your fingers.
- Ensure that the surface where you want to attach your CO-DRIVER NO2 is clean and dry. Additionally, the surface should not be too cold. A temperature of about 15°C is ideal.
- Only remove the red protective film from the magnets once you have found the perfect spot. Once the adhesive touches the surface, the magnets cannot be moved anymore.
- Press the magnets along with the CO-DRIVER NO2 onto the chosen surface for at least 20 seconds.
- The magnets will now securely hold your CO-DRIVER NO2 in place. You can easily remove the device at any time, while the magnets remain in their place.