Want to set the time and date on your P-DISC NO3? Or switch between summer and winter time? No worries – we’ve got you covered!
Here’s a quick overview of what you’ll find below:
Manually set time and date
When you activate the P-DISC NO3 for the first time, the time and date are automatically set. However, you can also manually adjust the time & date by following these simple steps:
- Push and hold
for around 3 seconds until the numbers in the display starts flashing.
- Start out by setting hours. Use
to adjust and click
- Then set the minutes. Use
- Move on to set the year. Use
- Next, set the month. Use
- Lastly, set the date. Use
When the above steps have been followed successfully, your P-DISC NO3 will emit a sound to confirm that it is set up correctly. Your P-DISC NO3 is now ready to use.
Please note that it is not possible to change the 30-minute parking interval on the P-DISC NO3.
How to turn off the device
We recommend not turning off the P-DISC NO3. If you still want to turn off the device, hold the button for around eight seconds.
A red light at the back of the device and a sound will confirm that the P-DISC NO3 is turned off.
To turn it back on, simply hold the button for around three seconds.
Daylight Saving Time
By default, your P-DISC NO3 is set to automatically switch back and forth to Daylight Saving Time (DST).
In case daylight saving time is abolished, you can deactivate this function:
- Hold down the
- Use the
- Confirm your selection with the
A sound indicates that your change has been successfully saved.